Mute Sound; Bass Boost; Select Srs Sound; Program Smart Remote Control To Control Tv - Maxell MXSB-252BT Manual De Instrucciones

Basic Operation

Mute Sound

Press the MUTE button on the remote
control to mute. Press this button again or
VOL+/VOL- buttons on the remote control
or on the unit to resume the sound. The
light indicator on the unit will blink until
sound resumes.

Bass Boost

Press the BASS button on the remote control
to turn on the bass. Press this button again
to switch to level 2 or to turn it off.

Select SRS Sound

Press and hold the SRS/BASS button on
the remote control for 3 seconds to
select SRS WOW HD effect.
Press and hold this button again for 3
seconds to cancel the effect.
Program Smart Remote Control to
Control TV
You can store a total of up to seven of
your most frequently used TV functions in
the TV learning zone of the Smart Remote
Control. This feature enables you to use
only one remote control to operate the
unit together with your TV.
The remote control codes of a TV are stored
in the Smart Remote Control. The available
preset buttons are ON/OFF ,
, ENTER, TV VOL+/VOL-, TV CH+/CH-.
NOTE:
During the learning process, the normal
remote control functions are disabled.
1. Place the Smart Remote Control (A)
within a 1 to 2 inch distance from the
TV remote control (B), pointer to pointer
as shown above.
2. Press and hold the LEARN button for 2
seconds to activate the learning mode.
A red indicator on the Smart Remote
Control (A) will light up.
3. Press one of the TV learning zone buttons
on the Smart Remote Control (A), the red
indicator flashes
4. Press the button on the TV remote
control (B) that is to be stored on the
Smart Remote Control (A).
When the code is received successfully, the
red indicator
will flash quickly 3 times. If the code is not
successfully received, the red indicator will
keep on flashing
5. Repeat steps 3-4 to program more
functions onto the Smart Remote Control(A).
6. Press the LEARN button to save the
setting and to exit the learning mode.
Red indicator will
EN-12
FUNCTION
immediately
turn off