Basic Operations; Turn On/Off; Select Sources; Adjust Volume Level - Maxell MXSB-252BT Manual De Instrucciones

Basic Operation
Turn On/O
ff
When an audio signal is applied to the
RCA or LINE-IN inputs, the unit will turn on
automatically after 5 seconds. Make sure
the input audio sound is at an intermediate
volume level to trigger the auto-on function.
Turning the System ON/OFF
Either,
1) Press the button on the unit; or
2) Press the ON/OFF button on the remote
control.
Note:
When turning the system on, the system will
continue in the mode it was last used in.
Note:
Be sure to unplug the power cord from the
outlet when the system is not in use for an
extended period of time.
POWER light indicator:
The unit will switch to standby mode when
the audio cables are disconnected or
when you turn off TV/external device after
several minutes.

Select Sources

Optical
Either:
1) Press Optical button on the remote
control; or
2) button on the unit will allow you to
select the Optical Input as the audio source.
OPTICAL light indicator:
RCA/LINE IN
Either:
1) Press RCA/LINE IN button on the remote
control; or
2) button on the unit will allow you to
select RCA or LINE IN source.
RCA/LINE IN light indicator:
BLUETOOTH CONNECTION
1) Press BT button on the remote control
or BT button on the touch panel
2) Blue LED flashes slow
3) Turn ON the BT function for the device
to be paired with this unit.
4) Device name "MXSB-252BT" will appear
on the device list.
5) Select "MXSB-252BT" from your device
and begin the pairing process.
6) The Blue LED will stay
pairing is successful.
BLUETOOTH light indicator:

Adjust Volume Level

Either,
1) Press the VOL +/- button on the remote
control; or
2) Press /
to increase or decrease the volume level.
If the unit is connected to the TV headphone
jack, you can control the Volume Level of
the Soundbar using the TV remote control
EN-11
ON when the
button on the unit,