Thompson MIC250IBT Instrucciones De Funcionamiento página 24

NOTES:
• Always directly connect a USB storage medium to the USB port to prevent any malfunctions.
• The USB port is not designed for charging external devices.
• Important: Switch the device to a different operating mode before you remove the USB storage
device.
AUX Input Jack
1. Press the POWER button to turn on the unit.
2. Rotate the SOURCE button repeatedly to select the Aux-In mode. 'Aux-In' will appear on the LCD
display.
3. Connect the AUX connect wire from the line out jack of your personal player (e.g. portable MP3
player) to the AUX input jack.
4. Start playback from your personal player.
Line Input Jack
1. Press the POWER button to turn on the unit.
2. Press the SOURCE button repeatedly to select the Line-In mode. 'Line-In' will appear on the LCD
display.
3. Connect the Line connect wire from the line out jack of your personal player (e.g. portable MP3
player) to the Line input jack.
4. Start playback from your personal player.
SOUND setting
With your unit switched on (not in Standby mode):
1. Press the SOUND button to enter the menu options.
2. Use the /
to your individual preferences.
Wireless Charger Function
Simply place your wireless charging device on the wireless charger area indicated on the top surface
and charging will begin on contact.
Output power is 9V
USB Charging
The USB port is designed for charging external devices, such as smart phones.
Output power is 5V
Phone Jack
1. Rotate the Volume to set a low volume
2. Insert the headphones into the phone jack.
WARNING! Risk of hearing impairment
• Set a low volume on the playback device before connecting the headphones to the
sound source.
• Avoid excessive volume, particularly over extended periods or frequent use. Excessive
volume can result in permanent hearing impairment.
button to set the EQ function (e.g. Normal, Classic, Jazz, Pop, Rock ) according
1.1A
2.1A
- EN 10 -