Thompson MIC250IBT Instrucciones De Funcionamiento página 25

Note the following information: Only use the power supplies listed below.
Specification:
Power:
Remote control power source:
Frequency ranges:
Max.consumption:
Speaker impedance:
Total music output:
Remark: The maximum connection distance is around 10 meters. Please place your Bluetooth speaker
as close as possible to this device to avoid the connection being disturbed.
About the disks
AC230V~ 50Hz 0.3A
3 Volt Lithium CR2025 battery (included)
FM: 88.8 – 108MHz
Bluetooth: 2402-2480MHz
40W
4 ohms
15W X 2
Handling
Do not touch the underside of disks.
Hold disks by the edges to avoid leaving fingerprints on the surface.
Any dust, fingerprints or scratches may cause a malfunction.
Never affix a label or sticky tape to the disk.
Storage
Put disks back in their case after use.
Never expose disks to direct sunlight or heat sources. Never leave disks
inside a car parked in full sunlight.
Cleaning
Use a clean, soft, lint-free cloth to clean the disk, working from the centre
outwards in a straight line. Do not use solvents such as petrol, thinners,
commercially available cleaners or antistatic sprays for vinyl disks.
- EN 11 -