Notes To The User; Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff IO-Link BAW M12MI-BLC35C-S04G Manual De Instrucciones

BAW M12MI-BLC35C-S04G and BAW M12MH-BLC70G-S04G
Inductive Linear Position Sensor
1

Notes to the user

1.1 Validity
This guide describes the construction, function, and setup
options for the inductive linear position sensors
BAW M12M_-BLC_ _ _-S04G with IO-Link interface.
It applies for the types BAW M12MI-BLC35C-S04G and
BAW M12MH-BLC70G-S04G.
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the linear
position sensor.
1.2

Symbols and conventions

Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3

Scope of delivery

– Inductive linear position sensor
– Fixing material
– Condensed guide
1.4

Approvals and markings

UL approval
File no.
E117437
4 english
The CE Mark verifies that our products
meet the requirements of the current EU
Directive (EMC Directive).
The sensor meets the requirements of the following
product standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge
EN 61000-4-5
– Conducted interference induced by
high-frequency fields
EN 61000-4-6
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
Severity level 3
Severity level 3
Severity level 3
Severity level 2
Severity level 3