Switch 1; Navigation Mode 1. Switch; Rear Panel; Technical Specification - Blackstar Amplification FS-10 Manual Del Usario

10. Effects Mode LED
Off.
11. Navigation Mode LED
Off.
12. Display
Closest note to that played.
13. Multi function LED
On = string tuned to note shown on display.
Note: In all modes, holding Switch 4 will activate the tuner and
holding Switch 1 will change the mode of operation.
The table below shows a summary of the switch functions:

Switch 1

Switch 2
Patch Mode
Press Ch1 Ch2
Hold Mode Bank down
Change
Effects Mode
Press Reverb on/off Delay on/off
Hold Mode change Set tap to
Delay
Navigation Mode
Press Store Patch down
Hold Mode change Bank down
10
Switch 3 Switch 4
Ch3 Ch4
Bank up Tuner
Modulation Tap Delay
on/off (by default)
Set tap to Tuner
Modulation
Patch up Select
Bank up Tuner

Rear Panel

Connect the footcontroller to the rear of your ID:Series amplifier
where indicated. Always use a good quality guitar lead (as supplied).

Technical Specification

FS-10
Dimensions (mm): 160 x 119 x 80
Weight: 1.2kg
11