Grey Intelligent Key - Kärcher B 150 R 75 Manual Del Usuario

Adjust wiping flaps
Adjust the wiper flaps by turning the

adjustment wheel so that they
touch the floor.
Turn the adjustment wheel an addi-

tional turn toward the bottom.
Spray nozzle (option)
The hose with the spray nozzle is at-
tached to the back of the appliance. It
serves for washing away dirt and for
manual cleaning of the wastewater
tank.
Turn programme selector switch to

"transport run".
Press Info button.

Turn the info button until "tank rins-

ing" is shown on the display.
Press Info button.

Turn the info button until "ON" is

displayed.
Press Info button.

The water pump delivers fresh wa-
ter through the spray nozzle.
Emptying the Dirt Water Reser-
voir
NOTICE
Overflow wastewater tank. When the
wastewater tank is full, the suction tur-
bine switches off and "Wastewater
tank full" is shown on the display.
WARNING
Please observe the local provisions re-
garding the wastewater treatment.
Take the dirt water discharge hose

from the support and lower above a
suited collection device.
NOTICE
The wastewater flow can be controlled
by squeezing the dosing unit.
14
Let off water by opening the dosage

device at the discharge hose.
The rinse the dirt water reservoir

with clear water.
Emptying the Fresh Water Tank
Open the lock of the fresh water

reservoir.
Drain the fresh water.

Attach the closure of the fresh wa-

ter tank.
Empty waste container (only
with R cleaning head)
Check the waste container. If need-

ed, remove and empty waste con-
tainer after work.
Shutting down
Remove the Intelligent Key.

Secure the machine with wheel

chocks to prevent it from rolling
away.
Charge battery, if required.


Grey Intelligent Key

Plug in the Intelligent Key.

Select the desired function by turn-

ing the Info button.
The different functions are described in
the following.
Transport run
Turn programme selector switch to

"transport run".
Press Info button.

In the transport run menu the following
settings can be made:
Key management
In this menu item the authorisations for
yellow intelligent keys as well as the
language of the display texts are se-
lected.
Turn the info button until "key man-

agem." is shown on the display.
Press Info button.

Remove the grey Intelligent Key

and insert the yellow Intelligent Key
to be programmed.
Select the desired menu item to be

modified by turning the Info button.
Press Info button.

Adjust the menu item by turning the

Info button.
Confirm the setting by pressing the

menu item.
Select the next menu item to be

modified by turning the Info button.
In order to save the authorisations,

call the "Save?" menu by turning
the info button and then press the
info button.
"Continue key menu":

12
-
EN
Yes: Programme further Intelligent
Key.
No: Exit key menu.
Press Info button.

Selecting the brush shape
This function is required when chang-
ing the cleaning head.
Turn the info button until "brush

head" is shown on the display.
Press Info button.

Turn the info button until the de-

sired brush shape is highlighted.
Press Info button.

Move the hoist drive for replace-

ment of the cleaning head by turn-
ing the info button:
up: Raise
down: Lower
OFF: Stop
Exit menu: Select "OFF" by turning

the info button and press the info
button.
When exiting the menu, the control
performs a restart.
Stopping times
Turn the info button until "stopping

times" is shown on the display.
Press Info button.

Turn the info button until the de-

sired assembly is highlighted.
Press Info button.

Turn the info button until the de-

sired stopping time is reached.
Press Info button.

Setting the battery type
Turn the info button until "Battery

menu" is displayed.
Press Info button.

Turn the info button until the de-

sired battery type is highlighted.
Press Info button.

Standard setting
Changes of the parameters of the indi-
vidual cleaning programmes that were
made during the operation are reset to
the basic setting after switching off the
appliance.
Turn the info button until "Basic set-

ting" is displayed.
Press Info button.

Turn the info button until the de-

sired cleaning programme is dis-
played.
Press Info button.

Turn the info button until the de-

sired parameter is displayed.
Press Info button - the set value

blinks.
Set the desired value by turning the

info button.
Press Info button.
