Julabo SW22 Manual De Operación página 69

Display and adjustment of over-/undertemperature:

Press the key
(example: 41 °C)
or
(example: 35 °C).
The indicator light blinks and the value previously set appears
on the MULTI-DISPLAY (LED).

If no further key is pressed the display will return to show the
actual bath temperature after approx. 8 seconds.

Use the cursor keys
display until the numeral you wish to change is blinking.

Use the increase/decrease arrows
selected numeral (0, 1, 2, 3, ... 9).

Press enter
Note:
The warning functions will be activated only after the bath
temperature has remained for at least 3 seconds within the
adjusted threshold values after the equipment is switched on.
to move left or right on the
to store the selected value
Shaking Water Baths
to change the
67