Autoadapt Turny Evo Manual De Instalación página 33

Install the bracket in the car
1
Install all mounting legs in OEM seat attachment in the floor. Use a spacer that
compensates for the mat's thickness.
2 Attach the L-profile brackets to the application tool again and put it back into the
intended position in the car. Mark where the hole for each mounting leg will be
drilled into the L-profile bracket. Then loosen the L-profile brackets from the appli-
cation tool and drill. Use 9 mm drill.
Spirit level
Spacers between 5-45 mm height are available
to buy as options. Contact Autoadapt Support for
further help.
1
Use a spacer that com-
pensates for the mat's
thickness.
Getting seated Turny Evo
2
Mark where the hole will be
drilled into the L-profile brack-
et for all legs.
33
EN