Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
WARNING: For your safety, this product is for outdoor use only.
Use heat-resistant gloves or hotpads when using
handles and air vents.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is
completely assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts
and fittings required.
Keep children away during assembly. This item contains small parts that can be
swallowed by children. Children should always be under direct adult supervision while
using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
V-3
INTENDED FOR RESIDENTIAL USE ONLY.
Do not use indoors or inside of any enclosure.
!
FOR YOUR SAFETY:
Refer to local codes and/or the authority having
jurisdiction for outdoor burning use.
Use long, sturdy fireplace tools when adding or
moving logs.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
DO NOT RETURN TO THE STORE!
STOP
TCS46JK
WARNING
PAGE 1 OF 6
COURTYARD CREATIONS INC.
Publicidad
Tabla de contenido
Manuales relacionados para Courtyard Creations TCS46JK
Resumen de contenidos para Courtyard Creations TCS46JK
- Página 1 Retain these assembly instructions for future reference. Quote the following FQC NO. when contacting the service center. SERVICE CENTER TOLL FREE NO. TEL: 1-877-539-7436 FAX: 1-877-539-7439 DO NOT RETURN TO THE STORE! STOP COURTYARD CREATIONS INC. PAGE 1 OF 6...
-
Página 2: Parts List
PARTS LIST PART MATERIAL CODE PART Q’TY 17C33A0712001YX BOLT M6*35 TCS46JK-CS06 17C33A0709001YX TABLE TOP BOLT M6*25 TCS47JK-CS02 17FA05040301-YX WASHER d6.5*D13*1.0 62TCS47JKY101 17FD05040301-YX CENTER CONNECTOR WASHER d6.5*D13*1.0(BLACK) 17FD05020601-YX 13C??B30008001 TILE WASHER d6.5*D10*1.6 13C??1B29008001 18000C23001 TILE PLASTIC NUT M6*P1.0 TCS46JK-CS01 17D02D030302-YX COVER... - Página 3 FIGURE 1 ATTENTION: Make sure that each bolt needed for all steps matches the corresponding figure to ensure proper assembly. NOTE: Parts come in more than one carton. Step 1: Place the table top (#1) onto a non-abrasive surface, such as a carpet, with its underside facing upwards. Fasten the legs (#2) to the underside of the table top (#1) rim by using bolts (#10), washers (#12), and plastic nuts (#15).
- Página 4 WARNING : FIGURE 4 Edges on the tiles may be sharp, make sure to wear protective gloves before opening the cartons. Step 4: Fasten the handle (#17) to the spark guard (#8) by using washers (#13 and #14) and nut (#16). Put the fire bowl (#7) into the table top and cover with a spark guard (#8).
- Página 5 FIGURE 7 Step 7: For use as a cooler, remove the cover (#6) and the spark guard (#8) from the fire bowl. Place the plastic cooler (#9) on top of the fire bowl (#7). Put the cover (#6) and spark guard (#8) on top of the center connector.
-
Página 6: Care Instructions
• This product is covered by YOU HAVE ALL OF THE PARTS LISTED. Missing A Part? Courtyard Creations Inc.'s IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE No Need To Go Back To PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME one–year limited warranty. -
Página 7: Instrucciones De Armado
Cuando se comunique con el centro de servicio, proporcione siempre el siguiente código de control de calidad (FQC, por sus siglas en inglés). NÚMERO GRATUITO DEL CENTRO DE SERVICIO TEL: 1-877-539-7436 FAX: 1-877-539-7439 ¡NO DEVUELVA ESTE PRODUCTO A LA TIENDA! ALTO PÁGINA 1 DE 6 COURTYARD CREATIONS INC. -
Página 8: Lista De Partes
LISTA DE PARTES No. DE CÓDIGO DE PARTE CANT. 17C33A0712001YX PARTE MATERIAL TORNILLO M6*35 TCS46JK-CS06 17C33A0709001YX CUBIERTA DE LA MESA TORNILLO M6*25 TCS47JK-CS02 17FA05040301-YX PATA RONDANA d6.5*D13*1.0 62TCS47JKY101 17FD05040301-YX RONDANA CONECTOR CENTRAL d6.5*D13*1.0(COLOR NEGRO) 17FD05020601-YX 13C??B30008001 LOSETA ARANDELA d6.5*D10*1.6 13C??1B29008001... - Página 9 FIGURA 1 ATENCIÓN: Asegúrese de que cada uno de los tornillos necesarios para todos los pasos coincida con la figura correspondiente para que el ensamblado sea correcto. NOTA: Las partes vienen empacadas en más de una caja. Paso 1: Coloque la cubierta de la mesa (#1) sobre una superficie no abrasiva, como puede ser una alfombra, con la parte inferior hacia arriba.
- Página 10 FIGURA 4 ADVERTENCIA: Los bordes de la loseta pueden ser afilados; asegúrese de usar guantes de protección antes de abrir las cajas. Paso 4: Sujete el asa (#17) a la pantalla antichispas (#8) con ayuda de las rondanas y la arandela (#13 y #14) y una tuerca (#16).
- Página 11 FIGURA 7 Paso 7: Para usar la mesa como hielera, quite la tapa (#6) y la pantalla antichispas (#8) del fogón. Coloque la hielera de plástico (#9) sobre el fogón (#7). Coloque la tapa (#6) y la pantalla antichispas (#8) sobre el conector central.
-
Página 12: Funcionamiento De La Unidad
SEPARE E IDENTIFIQUE TODAS LAS PARTES Y ASEGÚRESE DE QUE una garantía limitada de un TENGA TODAS LAS PARTES DE LA LISTA. año con Courtyard Creations ¿Le falta alguna pieza? SI NO ENCUENTRA TODAS LAS PARTES DE LA LISTA, REVISE EL Inc.