WARNING :
Edges on the tiles may be sharp, make sure to
wear protective gloves before opening the cartons.
Step 4:
Fasten the handle (#17) to the spark guard (#8) by
using washers (#13 and #14) and nut (#16). Put the
fire bowl (#7) into the table top and cover with a
spark guard (#8). Place the cover (#6) and the
plastic cooler (#9) on top of the center connector
(#3). See Figure 4.
Step 5:
See proper assembly while fire is in use.
See Figure 5.
Step 6:
When the fire is not in use, cover the fire bowl with
the cover (#6), and place the spark guard (#8) on
top of the center connector. Keep the grate in the fire
bowl. See Figure 6.
NOTE:
Press the button in the middle of the cover and the
handle automatically comes up. Remove the cover
by lifting the handle.
V-3
FIGURE 4
FIGURE 5
FIGURE 6
DO NOT RETURN TO THE STORE!
STOP
PAGE 4 OF 6
17
13
8
13
14
16
3
6
8
8
7
9
9
B
6
Press