Tabla de contenido
Publicidad
DRIVE SYSTEM
Type:
Transmissions:
Steering/Travel Control:
Brakes:
Axles:
Wire Harness:
Safety Group:
Forward Speed Range:
Reverse Speed Range:
CUTTER DECK
Type:
Construction:
True Cutting Width:
Blade Engagement:
Cutting Height Adjustment:
Cutter Blades:
Discharge Opening:
Caster Wheels:
Spindles:
Spindle Pulleys:
Cutter Deck Belts:
ADDITIONAL SPECIFICATIONS
OPTIONAL ITEMS/ATTACHMENTS
Fabric Grass Catcher:
Metal Grass Catcher:
Mulch Master:
Cup Holder:
APPROXIMATE DIMENSIONS
Length:
Length with grass catcher:
Tracking Width:
Width:
Width (with discharge chute up):
Width with grass catcher:
Height:
Height with grass catcher:
Weight:
Weight with GC-F4 grass catcher:
Weight with GC-4D grass catcher:
Date of Issue: July, 2003
Specifications Subject To Change Without Notice
TECHNICAL SPECIFICATIONS (CON'T)
Belt drive with twin power belts for increased friction to pulley surface.
Peerless 5-speed transmission, Model #700-070A.
Clutch/brake fingertip steering, key lock switch. (EZ Grip
design allows minimum hand force to operate controls.)
6" drum, band brake, one on each wheel.
1"
14 gauge wire.
Hand actuated operator presence system with blade clutch and
transmission interlock to engine kill.
0 to 6.0 mph
0 to 2.0 mph
SWM 32, SWM 36A, SWM48A, SWM 52A
Out-front design with anti-scalp rollers.
SWM32-48: 7-gauge steel with 7-gauge (3/16") steel skirt
SWM52:10-gauge steel with 7-gauge (3/16") steel skirt
SWM32=32.0" (81.3cm), SWM36=36.0" (90.2cm), SWM48=48.0"
(122.0cm), SWM48A=(122.0cm), SWM52=52.0" (132.0cm)
Electric blade engagement clutch with control panel switch
Manual adjustment 1-3/4" to 4-1/2" in 1/4" increments.
.197 Thick, Milled Edge, Wear Resistant Marbain™
SWM32 = Two (2) 16.5" blades, SWM36 = Two (2) 18" blades,
SWM48 = Three (3) 16.5" blades, SWM52 = Three (3) 18" blades
SWM32, 36, 52 Extra wide 11.5", SWM48 Extra wide 13.5",
9.4 x 3.5 smooth-tread flotation, inner tubes, split rims, roller bearings, with
quick pin removal.
Cast housing, taper roller bearing, low maintenance with top access
grease fitting and grease overfill relief poppet.
Split steel with easily removed taper hubs
B-section with Kevlar cord
GC-F4 Grass Catcher with 4 cubic ft. capacity
GC-4D Grass Catcher with 4 cubic ft. capacity and rope pull dump or
pick-up and dump.
Steel plate fits over discharge opening and steel baffles between each
blade with Eliminator Blades. Installs and removes in the field.
Enable operator to safely and conveniently carry a beverage with them.
SWM32
70.0"
70.0"
32.0"
43.0"
33.0"
51.0"
40.5"
40.5"
440 lbs.
480 lbs.
490 lbs.
.
SWM36A SWM48A SWM52A
75.0"
79.0"
72.0"
76.0"
37.0"
37.0"
48.0"
60.0"
38.0"
50.0"
56.0"
68.0"
40.5"
40.5"
40.5"
40.5"
475 lbs.
525 lbs.
515 lbs.
565 lbs.
525 lbs.
575 lbs.
16
79.0"
76.0"
37.0"
60.0"
53.0"
71.0"
40.5"
40.5"
535 lbs.
575 lbs.
585 lbs.
Publicidad
Tabla de contenido
