Note that when browsing the locator menu, the
When browsing the transmitter menu, the
To navigate menus:
1.
Press the
key to enter the menu.
2.
Use the
or
3.
Press the
key to enter the option's submenu.
4.
Use the
or
5.
Press the
key to confirm a selection and return to the previous menu.
6.
Press the
key to return to the main operation screen.
NOTE: When you select an option and press the
automatically.
Locator menu options
•
VOL: Adjust the speaker volume from 0 (mute) to 3 (loudest).
•
DATA: Delete, send or review saved SurveyCERT measurements and enable or
disable the Bluetooth communication channel.
•
BT: Enable, disable, reset or pair Bluetooth connections. Also defines the protocol
used when connecting to a PC or PDA.
•
GPS: Enable or disable the internal GPS module and enable/disable SBAS GPS
augmentation (GPS models only) – or select an external GPS source.
•
CDR: Perform a Current Direction (CD) Reset. (Alternatively press and hold the
key when in CD mode).
•
UNITS: Select metric or imperial units.
•
INFO: Run a Self-Test, display the date of the most recent service recalibration
(M CAL) or the most recent eCert calibration.
•
LANG: Select menu language.
•
POWER: Select local power network frequency: 50 or 60Hz.
•
ANT: Enable or disable any antenna mode with the exception of Peak.
•
FREQ: Enable or disable individual frequencies.
•
ALERT: Enable or disable StrikeAlert
•
BATT: Set battery type: Alkaline or NiMH. Li-Ion auto-selects when connected.
•
ARROW: Select Null or proportional Guidance arrows in Peak+ mode
•
COMP: Enable or disable display of the Compass feature.
Transmitter menu options
•
VOL: Adjust the speaker volume from 0 (mute) to 3 (loudest).
•
FREQ: Enable or disable individual frequencies.
•
BOOST: Boost transmitter output for a specified period of time (in minutes).
keys to scroll through the menu options.
keys to scroll through the submenu options.
and
keys act as left and right arrows.
and
keys act as left and right arrows.
key, the option will be enabled
.
™
12