INSTALLATION INSTRUCTIONS
Preview installation order
Checking and choosing
the proper location
Connecting the drain line
Test run
WARNING
y Washer is heavy! Two or more people are required when moving and unpacking the washer. Failure to do so
can result in back or other injury.
y Store and install the washer where it will not be exposed to temperatures below freezing or exposed to
outdoor weather conditions. Failure to follow this warning can cause serious injury, fire, electric shock, or
death.
y Properly ground washer to conform with all governing codes and ordinances. Failure to follow this warning
can cause serious injury, fire, electric shock, or death.
y To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow this warning
can cause serious injury, fire, electric shock, or death.
y The base opening must not be obstructed by carpeting when the washer is installed on a carpeted floor.
y Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
y Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service personnel - Do not contact the following parts while the appliance is energized: pump,
valve, motor, control board.
Unpacking and
removing shipping bolts
Leveling the washing
machine
INSTALLATION INSTRUCTIONS
Connecting the water line
Plugging in the power
cord and grounding
11