Before You Start
How to Remove Protective Shipping Film
and Packaging Tape
Carefully grasp a corner of the protective shipping film
with your fingers and slowly peel it from the appliance
surface. Do not use any sharp items to remove the film.
Remove all of the film before using the appliance for the
first time.
To assure no damage is done to the finish of the
product, the safest way to remove the adhesive from
packaging tape on new appliances is an application of a
household liquid dishwashing detergent. Apply with a soft
cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. It
cannot be removed if it is baked on.
Parts and Accessories Included
The following parts and accessories are included for use
with this steam oven. NOTE: the solid pan, perforated
pan and lid, and set of deep pans and lids are designed
for use in the steam cook and steam reheat modes.
Temperatures above 300°F can damage this cookware.
4 Mounting Washers
4 Mounting Screws
Solid Pan
Oven Rack
Table Rack
Temperature Probe
and Probe Plug (not
shown)
49-2000695 Rev. 1
Perforated Pan
with Lid
Reservoir with
Inlet Tube
Conditioning the Oven
water and carefully rinsed.
it for cooking and baking.
and ensure you get the best results from the start.
There will be a distinctive smell and a small amount of
smoke during conditioning. This is normal, but make
sure the kitchen is well ventilated.
accessories in the oven.
them carefully with hot water, dishwashing liquid and a
soft cloth.
5