Instructions For Use - Velmia Premium Motorcycle Cover Instrucciones De Uso

INSTRUCTIONS FOR USE [AE]

4. Instructions for Use

(Refer to the illustration on page 4)
1. Remove the cover from the storage bag included in the kit.
2. Unfold the cover completely.
3. Place the unfolded cover over your motorcycle from the front and above,
then pull the cover down at all four corners. The „FRONT" and „BACK" la-
bels sewn to the inside of the cover indicate the front and rear sides of the
cover. Do NOT install the cover backwards.
NOTICE
4. The cover has elastic hems at the front and back (illustration no. 4); pull
the elastic hems over the front and rear tires of your motorcycle.
5. OPTIONAL: If you are parking in a public area, check to make sure your
license plate is visible through the license plate window (illustration no. 8).
6. Tighten the front, middle and rear securing straps to fit (illustration no.
5). Be careful not to pull too tightly as this may cause the cover to tear. If
necessary, use additional securing straps to reduce the possibility of the
cover fluttering in the wind.
7. At the front of the cover, there are two reinforced openings for an option-
al locking mechanism (illustration no. 6). To secure your motorcycle with
the cover installed, slide your lock through one of the openings, through
your motorcycle, and out of the other so that both your motorcycle and the
cover are secured.
8. Removing the cover is the reverse of the above process. Remove the
cover completely before riding the motorcycle.
SNAG HAZARDS: Avoid catching the cover
on mirrors, muffler ends, shifters, brake le-
vers, foot pegs and antennae. Failure to use
care around these wear points could result in
a tear or puncture of the cover.
7