item 342630
USE
LOOKING FOR A RESIDENT WHOSE CODE YOU KNOW
To call a resident whose code you know:
TO CALL
A RESIDENT
PRESS
OR
BLOCK B:1
TO CONFIRM
B:1 F:04
I.U.:00016
TO CAL
B:1 F:04
I.U.:00016
OUTGOING
CALL
B:1
F:04
I.U.:00016
CONNECTED
END
This type of search is only possible if CODE has been set as Address book Format.
The codes must be programmed in the installation phase, associating an identification
code: B (block), F (floor) and I.U. (extension) with the resident.
• Press a pushbutton to access the search;
• Use the pushbuttons to select the Block, Floor
and Extension required and confirm each
choice.
• Press the pushbutton to make the call;
• If there is no reply press the pushbutton to interrupt
the call;
When the resident answers the display signals that the
conversation is in progress.
When the resident puts down the handset of the internal
device, or after 60 seconds, the call is interrupted and
the display returns to the rest position.
68