Information About The Batteries; Installation Of The Wall Bracket - Silvercrest SAS 7.4 LI C1 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Information about the batteries

This handheld vacuum cleaner is powered by rechargeable lithium-ion batteries.
Before using the handheld vacuum cleaner for the first time, the batteries must
be charged. The charge indicator lamp
soon as the batteries are fully charged, the charge indicator lamp
up green.
For care of the batteries, we recommend the following: once the batteries
have been charged, disconnect the mains adapter
Do not plug the mains adapter
indicator lamp
If the handheld vacuum cleaner is deep-discharged, the charge indicator
lamp
switch off the appliance and start charging.

Installation of the wall bracket

DANGER – ELECTRIC SHOCK!
Ensure that there are no power cables or other conduits or pipes in the wall
at the location where you intend to bore the holes for the wall bracket
Drilling into a current-carrying electric cable can be potentially fatal!
1) Place the barrel plug
shown in the following diagram:
Open up the small cover.
First, feed the cable through the cable routing and then push the barrel
plug
Then close the small cover again.
SAS 7.4 LI C1
flashes green.
flashes alternately red and green (approx. 1 minute). In this case,
of the mains adapter
into the opening in the wall bracket
lights up red during charging. As
from the mains socket.
back into the mains socket until the charge
into the wall bracket
so that it is firmly in place.
GB │ MT
lights
.
as
 49

Publicidad

Tabla de contenido
loading

Tabla de contenido