Packing Lists; Standard Accessories - koban KCTE-80 Manual Del Usuario

KCTE-80
Thermal Imager
Do not get water or salt water on the battery, or permit the battery to get wet.
Clean the case with a damp cloth and a weak soap solution. Do not use abrasives, isopropyl alcohol, or
solvents to clean the case or lens/screen.
Be careful when you clean the infrared lens. Do not clean the infrared lens too vigorously. This can damage
the anti-reflective coating.
Avoid condensation
Take the Thermal Imager from from cold to hot, it will appear condensation in thermal Imager. To protect the
Thermal Imager, you should power of the Thermal Imager, wait until the Thermal Imager has become war enough
for the condensation to evaporate.
Storage
If you do not use the Thermal Imager, put the Thermal Imager in cool and dry environment, if you store
Thermal Imager equipped with the battery, the power of the battery will be exhausted.

3-Packing Lists

Standard Accessories

Item
Thermal Imager
Lens
Li-ion battery
Adaptor
Micro SD
USB Cable
USB OTG cable
Non-slip Strap
User Manual
Warranty Card
PC Software Installation CD
Gift Box & Carrying Case
4-Specifications
Imaging and optical data
Field of View (FOV) / Minimum Focus Distance
Spatial Resolution (IFOV)
Thermal Sensitivity/NETD
Image Frequency
Focus Mode
Zoom
Focal Length
Quantity Description
1
1 Field of view = 17°x 17°, f = 9mm
1 3.7V, 2600mAH
1 Input AC Volts: 100V~240V, 50/60HZ, 0.3A Output
DC Volts: 5V, 2400mA
1 8Gbyte
1
1
1
1
1
1
1
17°x 17°/ 0.5m
3.78mrad
< 0.1°C @ +30°C (+86°F) / 100 mK
50Hz
Manual
1–32× continuous, digital zoom
9mm
www.grupotemper.com