Feature Identification; Enclosure Installation; Preparation - Tripp-Lite SmartRack SR25UB Manual Del Propietário

3. Feature Identification

7
1 Roof Panel
2
Locking, Reversible Split Front and Rear Doors
3
Locking Side Panels (25U enclosures use 2 side panels instead of 4. Side panels are not included with "EXP" models.)
4 Cable Management Rails
5 Casters A and Levelers B
6 Mounting Rails (Provide horizontal and vertical mounting points for equipment.)
7
Keys (One key provided for combination locks and one for side doors. Emka logo key opens combination locks, while plain key opens side panels.)
8
Divider
Not Shown: Mounting hardware, documentation, shipping brackets and other shipping materials.

4. Enclosure Installation

Caution! Read All Instructions and Warnings Before Installation!
WARNING: The rack enclosure is extremely heavy. Do not attempt to unpack, move or install the enclosure without assistance. Until it has been properly
installed and stabilized, the enclosure is prone to tipping and could cause property damage and/or personal injury. Use extreme caution when handling the
enclosure and be sure to follow all handling and installation instructions. Do not attempt to install equipment without first stabilizing the enclosure.

4.1 Preparation

The enclosure must be installed in a structurally sound area with a level floor that is able to bear the weight of the enclosure, all the equipment that will be installed in the
enclosure and any other enclosures and/or equipment that will be installed nearby. Before unpacking the enclosure, you should transport the shipping container closer to
the final installation location to minimize the distance you will need to move the unit after the protective packaging has been removed. If you plan to store the enclosure
for an extended period before installation, follow the instructions in the Storage and Service section.
You need several tools (user-supplied):
• 13 mm Open-end Wrench
• 18 mm Open-end Wrench
• Utility Blade
• Carpenter's Level
• Phillips-head Screwdriver
• 5/32" Allen Wrench
1
2
3
Model SR42UB is shown. The other models have similar features, with the differences noted.
You also need the following hardware (included):
• (50) Phillips-head Mounting Screws (M6 x 5/8")
• (50) Cage Nuts (M6)
• (50) Nylon Cup Washers
6
4
8
6
A
B
5
3
3
2