Components; Tools Needed; Key Definitions - Petsafe PPA00-10958 Manual De Instalación

Components

Snap-on
Closing Cover
Hex Nuts
- Small 4 pcs.
- Medium 6 pcs.
- Large 10 pcs.
- X-Large 12 pcs.
NOTE: The PetSafe
and materials, such as wood framing, may be required.

Key Definitions

Outer Frame Size: Overall pet door dimensions
Cut Out Size: Opening cut in homeowner's door for proper fit and pet door installation
Replacement Flap Size: Overall flap size when removed from pet door. During extreme changes in
weather, vinyl flaps can shrink during cold months and stretch in warmer months
Flap Opening Size: Usable flap size for pet to enter and exit through pet door
Interior Frame: Pet door frame on the inside of home
Exterior Frame: Pet door frame on the outside of home
Snap-on Closing Panel: Cover that snaps onto the pet door frame to close the pet door opening
4
Interior Frame
with Flap
Nylon Screws
- Small 4 pcs.
- Medium 6 pcs.
- Large 10 pcs.
- X-Large 12 pcs.
Plastic Pet Door can be installed in most doors and walls. Additional tools
®
Exterior Frame

Tools Needed

• Hammer
• Jigsaw
• Drill
• ⅜" Drill Bit
• Wire Cutters
• Slotted & Phillips Screwdrivers
• Masking or Painter's Tape
• Scissors
• Pencil
• Tape Measure
• Level
• Safety Equipment
Optional
• Duct Tape
• Caulk
1-800-732-2677
Plastic Core
Template
Covers
Installation
Guide