System Setup; Enter System Setup; Changing Settings - Honeywell RTH3100C Manual Del Propietário

System Setup

Enter System Setup

Next, you must set the thermostat to control the heating and cooling system in
your home. To enter system setup, press and hold both the
until the display changes (approximately 5 seconds).

Changing Settings

1. Press to change the setting.
t
2. Press to advance to the next function.
s
3. Press and hold
Description
Function Press the t button to
6 select your auxiliary heating
system and optimize its
operation
8 select your emergency heating
system and optimize its
operation
14 select Fahrenheit or Celsius
temperature display
and to exit and save settings.
s t
Setting
3 Heat pump
9 Electric furnace: Use this setting if you have any type of
electric heating system.
0 Fahrenheit temperature display (°F)
1 Celsius temperature display (°C)
6
Function
Setting
8
and buttons
s t
Setup
5