Steren MUL-107 Manual Del Usuario página 32

Measure current and alternating current
resistance simultaneously
1. Press the trigger to open the
hook and place the cable of the
circuit as show in the figure.
When the detected value is higher
than 0.01A it will show and in the
high part of the screen appears
the AC.
2. Touch the circuit with the tips.
When the detected value is higher
than 10MΩ, in the screen it will
show ----
If the detected value is under 50Ω,
the meter will emit an audible signal.
32
Ω
V
A