Power And Sound Controls - Panasonic CQ-R221U Manual De Instrucciones

Power and Sound Controls

E
N
G
L
I
S
H
1
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic
volume level adjuster so that you will not be deafened with sudden loud volume.
This system operates as follows. When [PWR] is switched on, the volume level is low. After that,
the volume level gradually returns to the level as the same as the one before turning off.
Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.
10
Power
Turn the key in the ignition until the accessory indicator lights.
Press [PWR] to switch on the power.
Notes:
When a cassette is inserted with all power connected, the unit
power will automatically turn on and tape loading begins and
plays.
When power is turned off while the time is displayed, the clock
mode remains on. When the [PWR] is pressed again, the
system is completely off.
Before you leave your car that has no ACC, be sure to switch
power off.
Volume
Press [VOL j
Press [VOL j
change numeric levels on the display rapidly.
Mute
Press [MUTE] to decrease Volume level.
"MUTE" blinks while this operation.
Press [MUTE] again to cancel.
CQ-R221U
j ] or [VOL i i ] to increase or decrease volume.
Volume Level
0 to 39
j ] or [VOL i i ] for more than 0.5 second to