Installation - KS ALAMO Serie Manual De Instalación Y Funcionamiento

INsTALLATION

sTEP 1 - REMOVE ALL MOUNTING hARDWARE
1
Shut off water supply.
Remove the hexagonal nut,
the disk and the gasket. Do not
2
remove the o-ring from the base
of the faucet.
sTEP 2 – INsTALLING ThE FAUCET
Place the faucet with O-ring into
the hole in the deck or lavatory.
1
Make sure the O-ring is located
between the deck or lavatory and
the bottom of the faucet.
under the deck, slide the gasket,
disk and hexagonal nut over
2
the flexible hose and secure the
faucet into place.
Secure the faucet to deck or
3
lavatory with the hexagonal nut
and the disk.
4
INsTALLATION
1
O-RINg
gASKET
DISC
NuT
2
O-ring
3
gASKET
DISC
NuT
gASKET
DISC
NuT
sTEP 3 – CONNECTING ThE WATER sUPPLY
For ÁLAMO, ÁLAMO ExT Connect
the flexible pipe to the water
supply.
For ÁLAMO DúO, ÁLAMO DúO
ExT: Connect the red flexible pipe
to the hot water supply and the
blue flexible pipe to the cold water
supply.
MAkE sURE ThAT ThE FILTER(s) Is/ARE INsTALLED BETWEEN ThE
FLExIBLE PIPE(s) AND ThE shUT OFF VALVE(s) (ANGLE VALVE) (NOT
sUPPLIED).
Turn on the central water supply
and the shut-off valves (angle
valves) and check for leaks.
Connect the power source.
2 INLETs VERsION 1 INLET VERsION
5