Permanent Installation - AKG C 400 BL Modo De Empleo

3. Remove the foam windscreen from the case.
4. Degrease the outside surface of the case by
cleaning it with alcohol.
5. Paint the case in the desired color using acrylic
paint or synthetic-resin enamel.
Important:
Do not use nitrocellulose paints. They attack plastics
and may damage the microphone case.
6. Allow the paint to dry completely. Replace the foam
windscreen. Snap the cirucit board and the bottom
plate back into place.
3. Installation

3.1. Permanent Installation

1. Use the supplied screws to fix the installation plate
at the desired location.
22
2. Snap the microphone onto the installation
plate.
Abb. 10