Wiring Diagrams; Circuit Diagrams - Efapel MODUS 55 Guia De Inicio Rapido

Random mode setting (2 circuits)
Main reset

WIRING DIAGRAMS

L
N
3,5mm

CIRCUIT DIAGRAMS

A1
IN
IN
IN
IN
DIMENSIONS
- setting of the maximum time of ON and OFF for the relay on random mode, "random", which is the same
for both, but connected to ON separately; menu input by pushing the
choosing the wanted screen for:
- setting of the maximum time to connect to ON the relay for minutes - temporising will be in random time
from 1 to
- setting of the maximum time to disconnect to OFF the relay for minutes - temporising will be in random
time from 1 to
Screen : push the
confirmation by pushing the
Screen : push the
confirmation by pushing the
At any moment it is possible to exit all the menu screens without saving settings by pushing the buttons
To cancel the electronic timer settings (hours, dates, settings, etc.), it is necessary to maintain simultaneously pushed
the buttons (
All the screens will be lit;
After some time, the electronic timer will request the date and hours settings.
If it also necessary to cancel all the saved programs, you should also push the
1 circuit
External Input
L/N
Note: The external input must be operated via a switch.
1 circuit
A2
minutes;
minutes;
button to enter; with the cursors
button; the screen will appear.
button to enter; with the cursors
button; the screen will appear.
and ) in the main menu, for 3 seconds;
L
N
MAXIMUM RECOMMENDED LOAD
button; using the cursors
setting of the maximum time to connect to ON (for minutes),
setting of the maximum time to disconnect OFF (for minutes),
key.
2 circuits
External Input
2 circuits
A1 A2
IN
IN
IN
IN
for
or .
L/N
DIN TH 35