Bell COCOON 300 Manual De Instrucciones página 5

STEP 7
Lay pad into carrier and thread VELCRO
through lower lap belt holes in seat. Secure VELCRO
straps behind seat.
7
STEP 8
Assemble shoulder harness to seat as shown. Grab
straps and pull to con rm that harness is properly
anchored into seat in both upper locations as well as
the center lower location.
9
Shoulder
Harness
Butter y
Back of Seat
Butter y opens up
to anchor strap in seat
Remove male end of Quick-Release buckle and thread
lap belt through the same slots used in Step 7.
Reinstall male end of Quick-Release buckle and pull on
strap to con rm that strap locks in buckle.
®
straps
®
NOTE: Pad is
machine washable.
®
Secure VELCRO
straps together
before washing.
Wash in cold water
and tumble dry low
or line dry.
10
Lap Belt
Reinstall lap belt buckle as
shown above to insure
correct assembly. Pull
strap making sure it locks.
STEP 9
Push grab bar into holes in seat. Grab bar can be
removed by pinching tabs together and pushing
upward.
8
STEP 10
Peel backing off adhesive tape and adhere re ector to
the untextured area on the back of the seat. Press
rmly in position to insure good adhesion.
Double check to make sure that all fasteners are
securely tightened.
ASSEMBLY IS NOW COMPLETE
VELCRO ® is a brand name (registered in the U.S.
Patent Of ce). Owned by VELCRO USA Inc. for hook
and loop fasteners.
24