Gprs/3G Remote Communication Via Usb Modem - Ingeteam INGEREV Serie Manual De Instalacion Y Uso

Ingeteam
3. Connect the rest of the charging stations as shown in the following figures:
First station
Control card jumper
The jumper of the control card must be removed in all the stations except for the final station on the
communication ring, where it must be installed.
Communication ring:
Modem
A maximum of 10 units can be interconnected.

4.3.2. GPRS/3G remote communication via USB modem

1. Connect the communications card to one of the charging stations located at one end of the installation in
order to start the communication ring. It can be connected both with the J15 and J17 connectors, as well
as the J16 and J18 connectors.
Control card jumper
22
Intermediate station
Control card jumper
First station Intermediate station
ABA2017IQM01_A - Installation and Operation Manual
INGEREV GARAGE
Final station
Control card jumper
Final station