Sunny SF-T7718 Manual Del Usuario página 33

E06: Motor Abnormality
E08: Control Board
Abnormality
E10: Motor Abnormality
NOTE: If you are unable to resolve an issue using the troubleshooting guide above, please
contact Customer Service at support@sunnyhealthfitness.com
The motor wire is not
connected, or the motor is
damaged.
The control board is not
connected.
The motor is damaged or a
moving part of the treadmill
is stuck and therefore the
motor is unable to rotate
properly.
32
Check motor wires to see if
the motor is connected. If the
wire has been punctured or
damaged, you will need to
replace it. If the problem is not
rectified, you may need to
replace the motor.
Check the upper and middle
wires to see if the control
board is connected. If the wire
has been punctured
damaged, you will need to
replace it. If the problem is not
rectified, you may need to
replace the control board.
Inspect moving parts of the
treadmill to ensure that they
are operating correctly.
Replace the motor
necessary.
Version 2.2
or
if