AKASO DL2 Manual De Usuario página 4

① OK Button: On / Off recording function In standby mode, press【OK】to start
recording, press【OK】again to stop recording.
② Menu Button
Function 1: In the standby mode, short press【M】key to enter the setup menu
interface.
Function 2: camera key in the camera mode, short press【OK】key to take a photo.
③ Power Button
Function 1: Screen ON/OFF function, short press the【Power】button to turn on or
off the screen. (When the screen is off, click on the display area can also
light up the screen)
Function 2: ON/OFF function, long press【Power】key to turn on/off the machine.
The unit automatically saves the video file and user settings and shuts
down.
④ UP
⑤ DOWN
⑥ USB interface: the machine power supply and internal battery charge.
⑦ AV IN camera interface
⑧ MicroSD card slot
⑨ GPS module (optional)
INSTALLATION AND USAGE
1. Installation
Insert MicroSD card into the recorder to store video, images and other files. Fix the
recorder in the position of rear view mirror and connect it to cigarette lighter via car
charger.
Note: You can lay out the extended charging/power supply wiring along the edge
of windshield. Optional rear camera is installed in the rear of the vehicle, and
you need to pay attention to the direction of the installation. Wiring can be
laid along the roof of a vehicle. After installation is complete, put camera plug
into the recorder's rear camera port. Adjust the lens position to ensure that
the lens level with the ground. Start the engine to check if the device has been
installed correctly.
Optimal Installation Location
Power Supply Wining
3
How to install rearview camera, You have two ways to install it.
1. Installed on the rear windshield.
2. Installed near the license plate.
3. Black and red lines connected to the reversing lights in order to view the reversing situation.
2. Start to work
Press [POWER] button to turn on the recorder; or connect car charger and start car
engine, the recorder will be started automatically.
3. Charging Battery and USB Connection
Press [POWER] button to turn on the recorder; or connect car charger and start car
engine, the recorder will be started automatically.
(1) You can use our free car charger. Upon access to power, battery symbol on top of
the screen will be changed into the charging symbol.
(2) The device could be connected to a computer via USB cable and a successful
connection would automatically pop up the options menu. You can press [UP /
DOWN] button to select and press [OK] button to confirm.
This device could be functioned as a portable hard drive to copy and transfer files to/
from computer.
4