AKASO DL2 Manual De Usuario página 5

INTRODUCTION TO MAIN INTERFACE FUNCTIONS
REC
12:45
2017-09-13 Tuesday
VIDEO MODE (ICON INTRODUCTION)
Audio status
Power state
Video lock/Unlock
Video status
instructions
Back
Return to
the main
interface
2016-09-20 12:23:12
Date/time
Rec Off Playback Video Lock
Audio Off Camera
Video time
Video lock/Unlock
Video resolution
Audio on / off
REC 00:58 1080FHD
Audio Off
Rec Off
Video Switch
Video on/off
image switching
Front/rear image switching
5
FEATURES
1. Automatic recording function
Start the car engine, the recorder automatically starts and turns on the recording
function. Turn off the car engine, the recorder automatically save the contents of the
record and shut down, record the video segment stored in the MicroSD card. When the
MicroSD card is full, the recorder will overwrite the earlier recorded images, and the
locked file will not automatically be covered.
2. Use the manual recording function
In the main interface, click the recorder icon
to the right of the icon, you can manually turn on/off video function. You can also press
the OK button to turn on/off the recording function. If you want to turn off the power,
press the [POWER] key again for 3 seconds, and the recorder will save the record
automatically and turn it off.
Setup 3. Set Up
In the main interface, click the [System Settings] icon
system settings, including recorder settings / general settings, as shown below:
【Note】 When entering the system settings, stop recording first.
Video Lock
Tale Captu
Night Mode
Front/rear
Take pictures
, enter the traffic recording screen point
Back
Resolution
Looprecording
NightMode
Boot into recorder interface
MotionDetection
Back
RecordAudio
DateStamp
G-Sensor
6
, enter the system settings, the
RecordSetting
1/2
Common Setting
RecordSetting
2/2
Common Setting