Preparation Before Use - Zodiac Security ZS-10A Manual De Instrucciones

Preparation Before Use

How to turn the ZS-10A on
The ZS-10A is powered by 3 AAA batteries. Before using for the first time, remove
the battery strip.
1. Unscrew and open the case
2. Insert the batteries according to the positive and negative signs
3. Close the case and screw it back
Note:
Because of the tamper switch, opening the rear cover of the keypad when the
latter is on triggers the alarm.
In such case, stop the alarm by disarming the system.
Installation
1. Unscrew the case and open it
2. Screw the rear cover to a door frame or to a wall
3. Fasten the front cover of the keypad to the rear cover and screw them together