Zodiac Security ZS-10A Manual De Instrucciones página 21

Register an RFID tag in the ZS-10A
1. Press Arm [ ] orHome Mode [ ] on the keypad
to unlock it.
Then type [admin code + #] to enter Setup mode.
Default admin code: 123456
If you hear 2 beeps, the code you have typed is wrong
2. Type [41#]. You hear one beep and the LED
indicator lights up: the keypad switches to
Connection mode.
3. Swipe the RFID tag in gront of the RFID
reader. You hear one beep: the connection is
successful.
If you hear two beeps, the RFID tag has already been
connected.
Press [*] to exit Setup Mode
To clear all registered RFID tags, press any of the Arm [ ] or Home Mode [ ]
keys on the keypad to unlock it, and then type [codice admin + 42#].
You hear one beep: the RFID tagshave been deleted from the keypad.
Usage
The keypad can be used as a remote control. Your user code or your admin code
will be required before arming or disarming the system, or switching to Home
Mode or Mute Mode.
Arm the system
1. Press Arm [ ] or Home mode [ ] key on the
keypad to unlock it.
2. Type your user code or admin code.
3. Press Arm key [ ]. The LED indicator blinks
once, the keypad beeps once and send to the
control panel the signal to arm the system.