Introduction; Switching On The Appliance; Advice On Electrical Connections; Operating The Mini Power Mixer - Robot Coupe Mini MP 170 V.V. Manual De Instrucciones

INTRODUCTION

The new Mini MP 170 V.V. and Mini MP 220 V.V.
models are the latest additions to Robot-Coupe's
range of power mixer. They have been specially
designed for processing smaller quantities. They are
fitted with a foot and blades which can be entirely
dismantled, and their shaft measure 6
5
and 8 / inches long respectively.
8
These power mixer are tools which are totally adap-
ted to the needs of professionals. They will enable
you to make soups, vegetables purées and cereal
preparations with little effort.
The variable-speed function will enable you to
adjust the speed to suit each preparation and to
start the processing at a lower speed in order to
reduce splashing.
The simple design of these appliances allows the
assembly and disassembly of the moving parts, to
ease maintenance and cleaning.
These instructions contain important information
that will enable you to extract the greatest return on
your investment.
We therefore strongly advise you to read these
instructions carefully before using the appliance.
SWITCHING ON
THE APPLIANCE

• ADVICE ON ELECTRICAL CONNECTIONS

The appliance should be plugged into a grounded
outlet.
Make sure that the voltage of your power supply
matches that shown on the identification plate of
your appliance.
6

• OPERATION

The power mixer is equipped with electrical current
and temperature overload protection. If the power
mixer stops unexpectedly you may try to restart it
5 / inches
8
by following steps 3-5 below. If the power mixer
does not restart, allow it to cool for a period of up to
30 minutes and the temperature overload will
automatically reset. You should then be able to
restart following steps 3-5 below.
1. Plug your ap-
pliance into the
power outlet, making
sure you do not press
the button (CB).
2. Insert the foot into
the preparation.
3. Press the control
button (CB), and the
power mixer will
start up.
4. To stop the power
mixer, release the
control button (CB).

• VARIABLE-SPEED OPERATION

Follow steps 1 to 3 above, then:
5. Change the speed of the motor by turning the
variable speed button (MV) towards the maximum
or minimum as required.
OPERATING THE
MINI POWER MIXER
Variable-speed: Speed between 2 000 and 12 500
rpm.
With the self-regulating speed system, once you
have selected a speed, it will remain constant, even
if the consistency of your mixture changes.

WORKING POSITION

For a more ergono-
mic approach, we
recommend that you
hold the handle of
the appliance in one
hand and the contai-
ner with the other. It
is a good idea to tilt
the power mixer
slightly, making sure
that the bell does not
touch the bottom of
the container.
Always make sure that the bell is sufficiently immersed
to avoid splashing and that the air vents of
the motor unit do not come into contact with any
liquid.
For optimum efficiency, two thirds of the shaft should
be immersed in the preparation.
Do not rest the bell against the bowl.
The splashguard should always be in place.