Publicidad
It is imperative the following safety and assembly instructions are followed as a safety measure.
• The weights stated in the assembly instructions must not be exceeded under any circumstan-
ces.
• Load figures apply for evenly distributed loads and static usage.
• The surface on which the workstations are positioned must have adequate load-bearing capa-
city.
• On positioning the workstations, pay attention to corridors and safety distances in relation to
machinery and installations. Corridors must not be encroached upon.
• On working at the workstations, make sure that tools and workpieces cannot fall off the table-
top.
• On moving workstations, there must not be any objects on the tabletop, workpieces could fall
and cause accidents.
• Workstations must always be levelled such that tools and workpieces cannot fall off the table-
top.
• The controller is not allowed to be opened under any circumstances! There is a risk of electric
shock.
• Modifications or changes to the controller, the cable remote control for the motor or any of the
connecting cables are forbidden!
• Electrical cables must not be subjected to a crushing hazard, bending or tensile load.
• During installation, it must be ensured that the components have acclimatised adequately to
the ambient temperature.
• Only use the connecting cables for the specific country.
• If the cables are damaged, unplug from the mains and have replaced by an appropriately quali-
fied person.
• Installation of the machine only by an appropriately qualified person. The mains system must be
adequately protected using a residual current device (RCD).
• Fasten cable appropriately to prevent tripping due to cables lying on the floor.
• Before operating the table's electrical height adjustment, always check that the height adjust-
ment zone is unobstructed both above and below the table top.
Keep other objects away at a safe distance, min. 120mm.
• The workstation must be secured against toppling when add-ons are being installed on the side
or on top of it.
TGH
WBH
11
Publicidad
