Smoky Mountain Vista Manual Del Usuario página 13

VISTA CHARCOAL GRILL
ASSEMBLY INSTRUCTIONS
STEP 11: ASSEMBLE THE OFFSET
FIREBOX LID
Assemble the (2) lid lower hinges [ AF ] to the
offset firebox. Align with the holes (threaded
inserts) and use (2) M6 x 45MM bolts [ BE ],
(2) flat washers [ BM ] and (2) locking washers
[ BN ] per side. Do not tighten, keep loose.
Next assemble the (2) lid upper hinges [ AE ]
to the back of the offset firebox lid [ AN ].
Align with the holes and use (2) M6 x 35MM
bolts [ BD ], (2) flat washers [ BM ], (2) locking
washers [ BN ] and (2) M6 hexnuts [ BH ] per
side. Do not tighten, keep loose.
Carefully place the offset lid [ AN ] on the
offset firebox and align the hinges. Insert
hinge pins [ BK ] into the hinges and push a
cotter pin [ BL ] into each hinge pin to secure.
Now tighten all bolts making sure the lid is in
alignment with the offset firebox.
STEP 12: ASSEMBLE THE LID
Assemble the (2) lid lower hinges [ AF ] to the
back panel. Align with the holes (threaded
inserts) and use (2) M6 x 45MM bolts [ BE ],
(2) flat washers [ BM ] and (2) locking washers
[ BN ] per side. Do not tighten, keep loose.
Next assemble the (2) lid upper hinges
[ AE ] to the back of the lid [ A ]. Align with
the holes and use (2) M6 x 35MM bolts
[ BD ], (2) flat washers [ BM ], (2) locking
washers [ BN ] and (2) M6 hexnuts [ BH ] per
side. Do not tighten, keep loose .
Carefully place the lid [ A ] on the cooking
chamber and align the hinges. Insert hinge
pins [ BK ] into the hinges and push a cotter
pin [ BL ] into each hinge pin to secure.
Now tighten all bolts making sure the lid is in
alignment with the cooking chamber.
!
WARNING!
DO NOT OPERATE GRILL WITHOUT ASH
TRAY IN PLACE. DO NOT OPEN ASH TRAY
DURING USE. KEEP ASH TRAY CLOSED
UNTIL ALL ASHES HAVE COOLED.
STEP
11
AE
AE
BK
BK
AF
AF
STEP
12
AN
AN
AF
AF
A
A
PAGE 13
Vista
AE
AE
BK
BK