Instructions For Assembly - Kettler 08326-100 Instrucciones De Montaje

Assembly Instructions
GB
How to handle the swing
Make sure that usage does not commence until the apparatus has been properly assembled
■
and subsequently controlled by an adult.
Instruct children on the proper handling of the apparatus and advise them of possible dangers.
■
Remember that the children's natural play instinct and temper may lead to unforeseeable situa-
■
tions excluding a responsibility of the manufacturers.
Although dangers to children during proper use of the apparatus are highly unlikely, all play on
■
the apparatus should be monitored by an adult.
For cleaning and caring the slide only use environmentally friendly and no aggressive or corroding
■
agents.
Waste Disposal: KETTLER products are recyclable. At the end of its useful life please dispose of
■
this article correctly and safely (local refuse sites).

Instructions for Assembly

Ensure that you have received all the parts required (see check list) and that they are undama-
■
ged. Should you have any cause for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully and carry out the operations in
■
the order shown by the diagrams. The correct sequence is given in capital letters.
The fastening material required for each assembly step is shown in the diagram inset. Use the
■
fastening material exactly as instructed. The required tools are supplied with the equipment.
The equipment must be assembled with due care by an adult person. If in doubt call upon the
■
help of a second person, if possible technically talented.
Please note that there is always a danger of injury when working with tools or doing manual
■
work. Therefore please be careful when assembling this machine.
Ensure that your working area is free of possible sources of danger, for example don't leave
■
any tools lying around. Always dispose packaging material in such a way that it may not cau-
se any danger. There is always a risk of suffocation if children play with plastic bags!
Bolt all the parts together loosely at first, and check that they have been assembled correctly.
■
Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all screw connections have been tigh-
tened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the
locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. additi-
■
on of tubing plugs).
List of spare parts
When ordering spare parts, always state the full item number, spare-partnumber, the quantity re-
quired and the S/N of the product (see spare parts drawing).
Example order: item no. 08326-100 / spare-part no. 10100016 / 2 pieces / S/N ...
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts,
6