Harbor Breeze E-AER52BRZ5LKRCI Manual De Instrucciones página 12

WIRING
2. Wrap electrical tape (not included) around each
individual wire connector (CC) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of box
from the BLACK and BLUE (if applicable)
connections.
3. Gently slide remote control receiver (H) flat-side up
into mounting bracket (C). Turn spliced/taped wires
upward and gently push wires and wire connectors
(AA) into outlet box. Let antenna from remote control
receiver (H) hang to the side.
NOTE: The remote control included with this fan
meets the following requirements:
a. Not for use with solid state fans.
b. Electrical rating: 120V / 60 Hz;
Should you choose to use a different remote control
with this fan, it must also meet these same
requirements.
4.
IMPORTANT: Using a full range dimmer
switch (not included) to control fan speed will
cause a loud humming noise from fan. To
reduce the risk of fire or electrical shock, do
NOT use a full range dimmer switch to control
fan speed.
motor amps:1.25 MAX.;
light watts: 300
(Incandescent only)
2
CC
3
Antenna
4
Dimmer
Switch
For illustrative purposes only--not
intended to cover all types of controls
Lowes.com/harborbreeze
12
CC
CC
C
A
H
3
2
1
Speed
Switch