Technical Specifications; Alarm Function - Trevi RC 855C Manual Del Usuario

RC 855C
1. POWER
2. ALARM1/VOL-
3. ALARM2/VOL+
4. HOUR/TUNING-
5. MIN/TUNING+
6. SET/PRE/ M+
7. AM/FM/AUX IN
8. DISPLAY HI/LOW/OFF
9. SNOOZE / SLEEP
10. NOT USED
11. POWER JACK
12. AUX IN JACK
13. LED DISPLAY
14. BATTERY COMPARTMENT
CONNECTING THE RADIO
Plug the external adaptor into 5V
been interrupted and restored, the clock display will blink. Make sure to reset
both the correct time and alarm time for proper operation.
TIME SETTING
In standby mode, press and hold the set/pre/m+ (6), then the clock display
(13) will blink. Press the hour/tuning- (4) min/tuning+ (5) or to set the hour
and min of the clock display respectively to the correct time. press set /
pre/m+ (6) again when finished the setting, the time display will not blink.
DIMMER HIGH / LOW / OFF
On time display mode, press dimmer hi/low/off (8) to set high or low or
turn off the led display.
RADIO OPERATION
Press power (1) once, it will turn on the radio, press am/fm/aux (7) to select
fm band or am band or aux. Press hour/tuning- (4) or min/tuning+ (5) to
adjust your desired frequency. Press alarm 2/vol + (3) to increase the
volume, press alarm 1/vol- (3) to decrease the volume.
The default volume level is 12, maximum level is 16.
MEMORY OPERATION
The clock radio can store 20AM and 20FM presets.
On radio playing mode, select your desired band (FM/AM), press up min/
tuning+ (1) or hour /tuning-(4) to choose your desired frequency, long
press set/pre/m+ (6) to enter into preset mode, the preset number will
show and flash on the led display (13), then short press hour/tuning- (4) or
min/tuning+ (5) to select your desired memory numbers from p1 to p20.
press the set/pre/m+ (6) to confirm your memory setting.
Repeat the above steps, you can store your desired stations.
After setting is ok, press set/pre/m+ (6) to select your preset frequency
to enjoy radio broadcasting. Press power (1) to turn on or off the radio.
SELECT AUX IN
1. Use a cable with 3.5mm stereo jack socket to connect the AUX IN (12)
on the back to the headphone / audio from a source device
2. Select the AUX IN input by pressing more times the AM / FM / AUX IN
(7), the display shows AU.

ALARM FUNCTION

SETTING ALARM 1 BY BUZZER
In clock display mode, press alarm1/vol- button (2) once to select alarm
6
AM/FM ALARM CLOCK
jack (11). When electrical power has
by buzzer, the "buzzer al1" icon light up and alarm time display will flash.
Using hour/tuning- button (4) and min/tuning+ button (5) to set your
desired alarm hour.
SETTING ALARM 1 BY RADIO
In clock display mode, press alarm1/vol- button (2) twice to select alarm by
radio, the "radio al1" icon light up and alarm time display will flash. Using hour/
tuning- button (4) and min/tuning+ button (5) to set your desired alarm hour.
SETTING ALARM 2 BY BUZZER
In clock display mode, press alarm2/vol+ button (3) once to select alarm
by buzzer, the "al2 buzzer" icon light up and alarm time display will flash.
Using hour/tuning- button (4) and min/tuning+ button (5) to set your
deisred alarm hour.
SETTING ALARM 2 BY RADIO
In clock display mode, press alarm2/vol+ button (3) twice to select alarm by
radio, the "al2 radio" icon light up and alarm time display will flash. Using hour/
tuning- button (4) and min/tuning+ button (1) to set your desired alarm hour.
SLEEP FUNCTION
If you want to listening the radio while fall asleep. you can use sleep function
by setting the sleep time.
With the radio on, press the snooze/sleep button (9) to enter into sleep mode,
the 90 no. shows on the led display (13). It states 90-minutes of sleep time
and to be setted in sequence 90-80-70-60-50-40-30-20-10-off. Press the
snooze/sleep button (9) to choose your desired sleep time, the sleep timer
will change by 10 minutes each time you press the sleep button (9). The
unit will stop playing when the timer countdowns from the preset sleep time
to the end and then switch off by itself.
SNOOZE FUNCTION
On alarm sound mode, press power (1) to stop the alarm, the alarm will not
resume. But if you press the snooze/sleep button (9) to stop the alarm, the al
icon of the led display (13) will blink, and the alarm will resume after 9 minutes.
BATTERY BACKUP
This clock has a backup power system to ensure continuous operation during
power failure. Insert two AAA battery into battery compartment (14) and the
clock mechanism will continue to maintain the current time and alarm program.

TECHNICAL SPECIFICATIONS

Power: 5V 1A with 100-240V ~ 50/60Hz power supply provided
Backup batteries (not included): .......................2 x 1,5V "AAA" batteries
FM frequency range: ............................................... 87.5-108MHz
Frequency range AM: .............................................. 522-1620KHz
Dimensions: ...................................................... 100 * 100 * 100mm
ENGLISH