Safety And Environment - AKG Acoustics C 477 Modo De Empleo

1 Safety and Environment

1.1 Safety
1.2 Environment
2 Description
2.1 Introduction
2.2 C 477 WR
8
Please make sure that the piece of equipment your microphone will be
connected to fulfills the safety regulations in force in your country and
is fitted with a ground lead.
1. Be sure to dispose of used batteries as required by local waste dis-
posal rules. Never throw batteries into a fire (risk of explosion) or
garbage bin.
2. When scrapping the equipment, remove the batteries, separate the
case, circuit boards, and cables, and dispose of all components in
accordance with local waste disposal rules.
3. The packaging of the equipment is recyclabe. To dispose of the
packaging, make sure to use a collection/recycling system provided
for that purpose and observe local legislation relating to waste dis-
posal and recycling.
Thank you for purchasing an AKG product. This Manual contains
important instructions for setting up and operating your equipment.
Please take a few minutes to read the instructions below carefully
before operating the equipment. Please keep the Manual for future
reference. Have fun and impress your audience!
The C 477 WR is a highly professional head-worn condenser micro-
phone specifically designed for almost "invisible" use by performers on
stage and radio or TV moderators. In line with this concept, the micro-
phone is extremely light.
The dual-diaphragm capsule of the C 477 WR features an additional
gold-sputtered protective diaphragm that prevents moisture and
perspiration from penetrating into the transducer. This reduces the risk
of failure caused by humidity to a practical minimum.
The microphone arm is attached to the left-hand side of the behind-the-
neck headband. A right-hand version is also available for TV moderator
duos or similar applications.
The C 477 WR is available in six versions:
1. C 477 WR L: with 3-pin mini XLR connector for use with AKG body-
pack transmitters or the optional MPA III phantom power adapter
from AKG for connecting to mixers or amplifiers. Black, microphone
on the left.
2. C 477 WR L/P: as C 477 WR L except for flesh-tone side pieces
and microphone.
3. C 477 WR oc: stripped and tinned leads. Black, microphone on the
left.
4. C 477 SH/P: with Lemo connector.
5. C 477 WR oc/P: stripped and tinned leads. Flesh-tone side pieces
and microphone, microphone on the left.
6. C 477 WR oc/P/R: as C 477 WR oc/P, except with microphone on
the right.