Connect The Transmitter - Advent ADVW801 Manual De Instalación Y Operación

ADVW801_instructions_trilingual 1/6/04

Connect the Transmitter

Connect the transmitter as follows:
Power the Transmitter
STEP 1
A Insert the power cord from Transmitter AC Adapter
(P) into the Transmitter Power Input Jack (K).
Plug the Transmitter AC Adapter (P) into any
B
standard wall outlet.
Transmitter Power Input
Jack (K)
Transmitter AC
Adapter (P)
NOTE Be sure to use the AC Adapter rated
12V DC 100 mA.
NOTE There is no ON/OFF switch. The transmitter is
designed to be left plugged in and powered at all
times. If you will not be using the ADVW801 for an
extended period of time, you may wish to unplug the
Transmitter AC Adapter.
3 ADVENT ADVW801 900 MHz Wireless Outdoor/Indoor Speaker System
4:05 PM Page 4
STEP 2 Connect to an Audio Source
OPTION 1 CONNECTING TO A STEREO RECEIVER
Connect the mini plug on the end of the Audio
A
Input Cable (M) to the mini jack on the "Y"
Cable Adapter (S).
Connect the dual RCA plugs on the other end
B
of the "Y" Cable Adapter (S) to the RCA-type audio
outputs of a stereo receiver/amp or other audio
source.
Stereo Receiver
Transmitter
Audio Input Cable (M)
"Y" Adapter Cable (S)
OPTION 2 CONNECTING TO A TELEVISION
Connect the mini plug on the end of the Audio
A
Input Cable (M) to the mini jack on the "Y" Cable
Adapter (S).
Connect the dual RCA plugs on the other end of
B
the "Y" Cable Adapter (S) to the RCA-type audio
outputs of a TV.
TV
Transmitter
Audio Input Cable (M)
"Y" Adapter Cable (S)
ADVENT ADVW801 900 MHz Wireless Outdoor/Indoor Speaker System
OPTION 3 CONNECTING TO A HEADPHONE JACK
Plug the mini plug on the end of the Audio Input
A
Cable (M) into the headphone jack. As needed, use
the Headphone Adapter Plug (R) to convert the
(3.5mm) mini plug to a full-size 1/4" headphone plug.
Stereo Receiver
Transmitter
Audio Input Cable (M)
Headphone Adapter Plug (R)
WARNING
DO NOT connect the RCA plugs of
the "Y" Cable Adapter to a speaker output on the
audio source. If you use the speaker output of an
audio source to connect the transmitter, you will
permanently damage the transmitter. It is only
designed to work with RCA-type line/variable
outputs or headphone outputs.
NOTE For more information on hooking up and using
the transmitter with various outputs, please see
More Helpful Information beginning on page 12.
4