Egistration - GE 28321 Manual Del Usuario

NOTE: When a handset is
NOTE: When a handset is
associated with a base, associated with a base,
a number is given to the a number is given to the
handset by the base. handset by the base.
This number is displayed This number is displayed
on the handset after the
on the handset after the
name and must be used name and must be used
for internal calls. for internal calls.
NOTE: A handset can be NOTE: A handset can be
registered to only one registered to only one
base. base.
Handset Setup
6. Place the handsets in the charge cradles.
The blue CHARGE indicator turns on,
verifying the batteries are charging.
Allow handset to charge for 1 hours prior
to first use. If you do not properly charge
the handset, battery performance is
compromised.
Handset Registration
For accessory handsets (without Base unit),
an auto-registration mechanism is available
so the unregistered accessory handset can be
automatically registered without the need of
entering a PIN code.
On the base:
1. Put the base into subscription mode, by
pressing and holding the PAGE button for at
least 8 seconds.
2. The DECT indicator light starts flashing. It
is now ready to be associated with a new
handset. This registration mode lasts 90
seconds after pressing the button. Once the
subscription is done, the base LED flashing
is switched off.
On the handset:
1. Make sure your phone is OFF (not in talk
mode).
, navigate to the Registration
2. Press
menu, press
3. Use or
to enter.
to scroll to Register Handset.
9