Technical Data; Troubleshooting - Super Ego DRILL-71 Manual De Instrucciones

Technical data

Operating power: 230V-50Hz
Capacity: 710 W
No load speed: 0-3.000 r.p.m.
Geared-rim drill chuck-capacity: 1,5 – 13 mm Ø.
Protection class:
Maximum drilling depth
Wood: 20 mm
Concrete: 13 mm
Steel: 10 mm

Troubleshooting

Problem
Motor does not run
Vibrations are too
strong
Possible cause
No electricity comes to the machine.
The motor is overloaded or overheated.
Screws or parts of the machine are
loose.
The impact drill is not correctly
mounted.
The work piece is not properly
supported.
Solution
Check the power supplier and the
power line.
Allow the machine to run idle for about
2 minutes so that it can cool down.
Tighten all screws.
Mount the impact drill correctly
(see Before operation)
Secure the workpiece
(for example on a workbench).
GB
19