LIGHT PATH SELECTOR
LEVER
In
Out
LIGHT PATH SELECTOR
LEVER
In
Out
9.8
Mechanical stage and sample holders
•
For the best image quality, use flasks, Petri
dishes and slides with a 1.2 mm thickness.
1. Place the proper insert for your specimen (ac-
cording to the table on the right) on the stage,
and fix it with the stage clip.
2. Turning the X and Y knobs, move the specimen
to the required position. (Movement Range: 120
(width) × 78 (length) mm).
Moving the specimen
Move the specimen to the desired position by free-
hand or by turning the knobs of the mechanical stage.
•
When switching objectives, take care not to
touch the adaptor plates with the objectives,
as their weight may damage the front lens.
IM-3
BRIGHTNESS
20% used for binocular observation / 80%
used for video or photography
100% used for binocular observation / 0%
used for video or photography
IM-3F / IM-3FL4 / IM-3LD
BRIGHTNESS
0% used for binocular observation / 100%
used for video or photography
100% used for binocular observation / 0%
used for video or photography
Page 19
APPLICATION
Binocular observation and micrography
or video can be operated simultaneously
Binocular observation
APPLICATION
Microphotography or video acquisition
Binocular observation
M-793.1
Holder for Petri diameter 38mm
(M-793.2 needed)
M-793.2
Holder for Terasaki and Petri
diameter 65mm.
M-793.3
Holder for slide and Petri diameter
54mm.
M-793.4
Holder for 2+2 slides.
M-793.6
Holder for Utermöhl-Chamber
(M-793.3 needed).
M-793.7
Load-bearing side extension