The Meter Structure; Rotary Switch - Surtek 111005 Manual De Usuario

THE METER STRUCTURE

1) Transformer jaws designed to pick up the AC
current flowing through the conductor.
2) The jaw opening light.
3) HOLD button.
4) LCD display.
5) Function button.
6) V input terminal: Input for voltage
measurement.
7) COM input terminal: Return terminal for all
measurements.
8) Hz Ω: Input for capacitance,
continuity, diode, frequency/duty cycle and
resistance measurements.

9) Rotary Switch.

10) Trigger. Press the lever to open the
transformer jaws and turn the jaw opening
light on. When the pressure on the lever is
released, the jaws will close and the light will
off again.
ROTARY SWITCH
Below table indicated for information about the rotary
switch positions.
Rotary Switch
positions
(Figure 1)
Function
Turn on or off the meter.
AC voltage measurement range from 4 V
to 600 V or DC voltage measurement range
from 400 mV to 600 V
Diode Test
Continuity test.
Resistance measurement range from 400 to
40 M
Capacitance test range from 4 nF to 200 µF
Frequency measurement range from 10 Hz
to 10 MHz
AC current measurement range 400 A to 1
000 A
E N G L I S H
Figure 1
29