Selecting The Tone; Setting The Tone Volume; Activating The Horn; Getting Repair Service Or Technical Assistance - Federal Signal eHorn Instrucciones De Instalación Y Servicio

Installation and Maintenance Instructions

Selecting the Tone

The eHorn is factory‑set to the 55/56 tone. To select the 52 eHorn
tone, move the jumper on the tone generator/amplifier board
(Figure 5 on page 14).

Setting the Tone Volume

The volume of the eHorn is adjusted by tap selection on the tone
generator/amplifier board.

Activating the Horn

To activate the horn, apply the appropriate line voltage to the horn
power input terminals. The horn remains active as long as line
voltage is present.

Getting Repair Service or Technical Assistance

Products returned for repair require a Return Authorization form
from your local distributor or from Federal Signal. To obtain
repair service or technical assistance from Federal Signal, call
708‑534‑4756 or 877‑289‑3246. For instruction manuals and
information on related products, visit:
www.federalsignal‑indust.com
Model eHorn
16