Safety Information; General Information; Package Contents; Module Installation - WEG IOC-01 Guía De Instalación, Configuración Y Operación

1. SAFETY INFORMATION

All safety procedures described in the manual must be followed.

2. GENERAL INFORMATION

This user guide provides information for installation, configuration and operation of the optional
modules IOC-01, IOC-02 and IOC-03.
These modules are dedicated to the expansion of digital inputs and outputs in Soft-PLC applications.
NOTE!
The IOC-01 and IOC-02 accessories can be used only with CFW-11 inverters that have
software version V2.00 or higher.
The IOC-03 accessory can be used only with CFW-11 inverters that have software
version V3.10 or higher.

3. PACKAGE CONTENTS

Accessory module in anti-static packaging.
„
Installation, configuration and operation guide.
„
Fixing screw.
„

4. MODULE INSTALLATION

The optional board modules are installed directly into slots on the CFW-11 control module.
Figure 1: Identification of slots of the optional modules
Installation, Configuration and operation guide
- slot 1: white
- slot 2: yellow
- slot 3: green
5