Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Disinfecting
Disinfect the tank by filling it with a solution of bleach in water (1:
1000). Circulate this disinfecting mixture through the waste water
system. Remove the solution and rinse the tank with clean tap water.
4
Making ready for winter
The tank, pipes, pump, etc. must always be drained completely.
Never put anti-freeze in the tank or other parts of the drinking wa-
ter system to protect it against freezing, anti-freeze is very poison-
ous!
5
Maintenance
- Check the breather nipple regularly and clean the sieve of the
breather nipple if necessary.
- Check the hoses and hose connections for possible leaks annually
and fit new hoses and/or hose clamps as necessary.
- Also check the tank for damage as a result of chafing. Replace a
damaged tank immediately.
- Carry out the disinfection procedures described under 'Use' at the
beginning of the sailing season.
- A tank and installation that is strongly contaminated by algae can
be cleaned by rinsing the tank, the pump and pipes with a solu-
tion of bleach in water (1:20). Rinse the tank with clean tap water.
- Clean the valves if necessary. Thereto remove the relevant hose
pillar, remove the valve and clean it. Re-assemble in reverse order.
- Ensure that the valves are refitted in the correct manner.
12
110115.05
n
ote
6
Technical details
Waste water tank system
Type
:
WWS42 B
42 litres
Capacity*
:
9.2 Imp.gal.
13.4 Imp.gal.
11.1 US gal.
12.5 kgs
Weight*
:
28 lbs
Max.
: 30 kPa (0.3 bar, 4 psi)
Pressure
mMPE (Metallocene Medium Density Polyethylene),
Material
:
colour: black
*) Nominal values are given for capacity and weight.
Slight deviations are possible.
Hose fittings
For filling hose
:
38/25/19/16 mm dia. (1 1/2", 1", 3/4", 5/8")
For discharge hose
:
38 mm dia. (1 1/2")
For air relief
:
19 mm dia. (3/4")
For discharge
:
38 mm dia. (1 1/2")
Fittings for hose with suction tube
For Vetus waste water deck cap : 38 mm dia. (1 1∕2" dia.)
Pump
Type
:
Self-primimg diaphragm pump
Capacity, at 0 m head :
27 I/min (5.9 Imp. gal/min, 7.1 US gal/min)
Max. suction height :
3 metres column of water (10')
Max. head
:
5 metres column of water (16'5")
Max. suction height
:
5 metres column of water (16'5")
+ head
Material
Pump housing
Hose pillars
Diaphragm
Valves
Bell housing
Electric motor
Type
Voltage
Current (maximum)
Level sensor
Power supply
Current taken
Output
Accuracy
Storage temperature
Useful temperature range :
WWS61 B
WWS88 B WWS120 B
6 litres
88 litres
19.4 Imp.gal.
26.4 Imp.gal.
16.1 US gal.
23.2 US gal.
31.7 US gal.
14 kgs
16 kgs
31 lbs
35 lbs
:
Plastic
:
Plastic
:
Neoprene rubber
:
Neoprene rubber
:
Aluminium, coated
WWS..12B
WWS..24B
:
Permanent magnet DC motor
:
12 V
24 V
DC
:
6A
:
12 or 24 Volt
:
35 mA
Analogue, suitable for 1 or 2 Vetus
:
level meters or 1x WWCP (control
panel for dirty water)
:
+/- 5% (temperature compensated)
:
-20° - +70°C (-4° - +158°F)
0 - +50°C (32° - +122°C)
Waste water tank system
120 litres
18 kgs
40 lbs
DC
4A
Publicidad
Tabla de contenido
