Key To Symbols; Simplified Eu Declaration Of Conformity - Urmet alpha 1168/45 Manual De Instalación

memory device exerting leverage on both sides
with a small screwdriver.
— insert the memory device in the new module,
powered off, paying particular attention to the
direction of insertion as shown in the figure.
ERROR CODES
The meanings of the error codes that may be
displayed during programming are given below:
A key not produced by Urmet has
been presented to the front panel.
Key memory full.
An attempt is being made to delete
a key not present in the memory.
Key memory absent or faulty.
Key memory data consistency
error.
Write to memory error.
14
MAINTENANCE
Use a soft damp cloth to clean the front panels.
Do not use products containing alcohol or window
cleaning products.

KEY TO SYMBOLS

Symbol
Direct input voltage
~
Alternating input voltage
See the installation manual of
the device
SIMPLIFIED EU DECLARATION
OF CONFORMITY
Hereby, URMET S.p.A. declares that the radio
equipment types:
PROXIMITY KEY READER with code 1168/45 or
1168/45W
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address: www.
urmet.com
Description
DS1168-008A